同升注册送58,同升s8s888,开户注册送36无需申请

电话
联系我们
CONTACT US
传真:0531-86370030
邮箱:870027617@qq.com
地址:济南解放东路29号
热点问题
您当前所在的位置:首页 - 新闻资讯 > 热点问题 >
防腐木凉亭在刷漆时的注意

来源:http://lilas-fashion.com 时间:2021-04-10

防腐木凉亭刷油漆有两个好处,一是漂亮(尽管木材自身也很漂亮),而是能够有用的维护防腐木凉亭。户外凉亭在保养期间会用的油漆,那么用什么油漆好呢?防腐木凉亭厂家就为您回答。
There are two advantages of painting antiseptic wood pavilions. One is beautiful (although the wood itself is beautiful), but it can effectively maintain the antiseptic wood pavilions. Outdoor pavilion will use paint during maintenance, so what kind of paint is good? Anticorrosive wood Pavilion manufacturers will answer for you.
断定是什么木质的,防腐木假如没有刷,色彩是实木本性,那么能够直接用清漆,别的防腐木油漆有许多色彩,如加州红色,锈红,棕黑等等。此外这儿还有几点建立防腐木凉亭时刷油漆要注意的事项:
Determine what kind of wood it is. If anticorrosive wood is not brushed and its color is solid wood nature, varnish can be used directly. Other anticorrosive wood paints have many colors, such as California red, rust red, brown black and so on. In addition, there are also several points to pay attention to when building anticorrosive wood Pavilion
1.用软棕毛刷沿木材纹路方向薄薄的均匀的进行涂刷,刷完后去除剩余木蜡油,涂刷量一定要少,不可涂的过厚;待表面实干后,对被涂物悄然打磨、擦净,12小时分可涂第二遍。
1. Use a soft brown hair brush to brush along the direction of wood grain. After brushing, remove the remaining wood wax oil. The amount of brushing must be small and not too thick. After the surface is dry, polish and wipe the coating quietly, and apply it for the second time in 12 hours.
2..须在8℃以上的气温下进行加工。
2. It must be processed at the temperature above 8 ℃.
3.涂木蜡油前须将防腐木材表面用细砂布打磨,并擦净至表面润滑。木材表面如有纤维,可用木砂纸P240或以上悄然地砂光。
Clean the surface of wood with wax cloth before polishing. If there is fiber on the surface of wood, it can be sanded quietly with wood sandpaper P240 or above.
4.擦涂前,先将无尘布浸润均匀,将过多的蜡油挤出一部份;擦涂时用力要均匀,不可用力过重或过轻,先顺被涂物表面反正替换各擦几回,终究收尾时顺木纹方向匀擦,使木蜡油充分进入木纹内,静置晾干;待表面实干后,在被涂物表面悄然打磨、擦净,同上进程再操作一次。
4. Before wiping, soak the dust-free cloth evenly and squeeze out part of the excessive wax oil. When wiping, the force should be uniform and not too heavy or too light. First, wipe it several times along the surface of the object to be coated. Finally, wipe it evenly along the grain direction to make the wax oil fully enter the grain and dry it in the air. After the surface is dry, polish and wipe it quietly on the surface of the object to be coated Do it again.